Fully Enclosed Slip Rings

Fully Enclosed Slip Rings
Fully Enclosed Slip Rings

In most cases, sealed enclosures are used to prevent the ingress of liquids or dust. BGB can use in-house testing to meet customers required IP rating.

Standard Range includes:

SPB01
Number of circuits – As required
Diameter – 280.00mm
Height – Dependant upon the number of circuits
Bore size – 38.10mm
Current per circuit – 35A
Voltage (phase rings) – 690V AC
Voltage (earth/ground rings) – 400V AC
I.P. 65

SPB02
Number of circuits – Up to 14
Diameter – 190.00mm
Height (to 8 circuits) – 324.00mm
Height (to 14 circuits) – 448.00mm
Bore size – 18.00mm
Current per circuit – 35A
Voltage (phase rings) – 690V AC
Voltage (earth/ground rings) – 400V AC
I.P. 65

SPB03
Number of circuits – As required
Diameter – 286mm AF
Height – Dependant upon the number of circuits
Bore size – 38.10mm
Current per circuit – 35A
Voltage (phase rings) – 690V AC
Voltage (earth/ground rings) – 400V AC
I.P. 65

SPB32
Number of circuits – From 2 upwards
Diameter – 127.00mm
Height – Dependant upon the number of circuits
Bore size – 19.05mm
Current per circuit – 15A
Voltage – 250V AC
I.P. 65

SPB35
Number of circuits – From 2 upwards
Diameter – 171.00mm
Height – Dependant upon the number of circuits
Bore size – 38.1mm
Current per circuit – 35A or 45A
Voltage – 600V AC

SPF02
Number of circuits – 10
Diameter – 108.00mm (excluding torque arm)
Height – 146.00mm (excluding plug connector)
Bore size – N/A
Current per power circuit (2 off) – 20A
Current per signal circuit (8 off) – 10A
Voltage per circuit – 24V
I.P. 65

Bespoke units are also available on request.


Our website uses cookies so that we can provide a better service. Continue to use the site as normal if you're happy with this, or find out how to manage cookies.   x